Cadillac CTS-V Gen 2 Differential Bearing Kit – Version B

Cadillac CTS-V Gen 2 Differential Bearing Kit – Version B

Finally, a bearing kit for your Gen 2 CTS-V! We’ve invested a lot of time and effort into building these bearing kits. You won’t find them anywhere else!

Includes the following

• Differential side bearings & races
• Inner & outer pinion bearings & races
• Axle stub shaft seals
• Pinion seal
• Case o-ring

This kit fits the 09-15 Gen 2 CTS-V

There are two different bearing kit versions for the 09-15 (Gen 2) Cadillac CTS-V. See below to identify which one you have before ordering! If you are unsure, then please reach out to us and we’ll be glad to help.

CTS-V Bearing Kit Identification Chart

We recommend physically checking the differential before ordering.

Go underneath the car to check the following items

1. Verify that it’s a cast iron differential housing. If yes, then continue on to the next steps. If it’s aluminum, then skip to Step 3

2. Check if you can physically see the pinion seal at the front of the differential assembly behind the yoke

• If you can see the seal is larger than the pinion yoke dust shield, then it’s the 4 3/8″ seal which means this is the correct kit (Version B)
  • CTS-V Gen 2 Differential Bearing Kit – Version B

• If you cannot see it, then it’s the smaller 3 3/8″ seal and will use the kit just below
  • CTS-V Gen 2 Differential Bearing Kit – Version A

3. If you have the aluminum housing, then you’ll need the Version C kit listed just below

Version C – Cast Aluminum V1 Housing with 3 3/8″ seal