Tremec T56 & TR6060 Build Packages
Need Help Deciding?
Level 1
T56 Stage 1 Build
$1682.44*
T56 Stage 1 Rebuild Kit
- Carbon synchro rings 1-2 inner/middle/3rd/4th-5th-6th + OEM reverse ring
- Stock shift fork pads 1-6-R
- Stock shifter cup bushing
- Front & rear seals
- Tailhousing bushing
- Snap rings
- Roll pins
- Bearing Kit
- Tolerances set to our specs
- Professional disassembly & reassembly
Options:
- Bead blast case +$125
- Powder coat case +$400
Level 1
T56 Stage 2 Build
$2072.39*
T56 Stage 2 Upgrade Build Kit
- Carbon synchro rings 1-2 inner/middle/3rd/4th-5th-6th + OEM reverse ring
- Billet chromoly synchro keys 1-2/3-4/5-6/Rev
- Bronze shift fork pads 1-6-R
- Bronze shifter cup bushing
- Billet guide pins
- Steel 3-4 shift fork
- Front & rear seals
- Tailhousing bushing
- Snap rings
- Roll pins
- Bearing Kit
- Tolerances set to our specs
- Professional disassembly & reassembly
Options:
- 32-spline output shaft conversion
- Oiler sprayer bungs +$325
- Bead blast case +$125
- Powder coat case +$400
Level 3
New Tremec Magnum F Transmission
$3545.00
Brand New Tremec T56 Magnum F Transmission
- 31-spline output shaft
- 31-spline billet slip yoke not included. Click here to purchase
- 26-spline input shaft
- Warranty directly with Tremec
- Typically available same-day
- Important: GTO requires a 1-piece driveshaft with 31-spline slip yoke & swap shift lever from the T56
Level 4
New Built Stage 2 Upgraded Tremec Magnum F Transmission
$5395.00
New Built Tremec T56 Magnum F Transmission
- Carbon synchro rings 1-2/3-4/5-6/Rev
- Bronze shift fork pads 1-6-R
- Bronze shifter cup bushing
- Billet guide pins
- Convert 2nd and 3rd gears to symmetrical engagement design
- 31-spline output shaft
- 31-spline billet slip yoke not included. Click here to purchase
- 26-spline input shaft
- Tolerances set to our specs
- Professional disassembly and reassembly
- Important: GTO requires a 1-piece driveshaft with 31-spline slip yoke & swap shift lever from the T56
Options:
- Oiler sprayer bungs +$325
- Powder coat case +$400
Level 5
T56 Stage 3 Faceplated Build
$5599.95*
Gforce T56 1-4 billet gearset
- Good for approximately 1200rwhp/rwtq
- Includes additional machining required for installation
- Faceplated only
- Please call to check availability
- Carbon 5-6 synchro rings + OEM reverse ring
- Bearing kit
- Steel 3-4 shift fork
- Bronze shifter cup bushing
- Bronze shift fork pads 1-6-R
- Billet guide pins
- Tailhousing bushing
- Front & rear seals
- Snap rings
- Roll pins
- 32-spline output shaft conversion
- 32-spline billet slip yoke included
- Tolerances set to our specs
- Professional disassembly and reassembly
Options:
- Oiler sprayer bungs +$325
- Bead blast case +$125
- Powder coat case +$400
Level 6
Tremec Magnum F Stage 3 Faceplated Build
$7299.95*
Gforce Magnum 1-4 billet gearset
- Good for approximately 1500rwhp/rwtq
- Includes additional machining required for installation
- Faceplated only
- Please call to check availability
- Must have a Magnum or modify the T56 to accept TR6060 internals
- Carbon synchro rings 5-6/Rev
- Billet 1-4 shift forks
- 31-spline output shaft
- Forged 31-spline slip yoke included
- Bearing kit
- Bronze shifter cup bushing
- Bronze shift fork pads 1-6-R
- Billet guide pins
- Tailhousing bushing
- Front & rear seals
- Snap rings
- Roll pins
- Tolerances set to our specs
- Professional disassembly and reassembly
Options:
- Oiler sprayer bungs +$325
- Bead blast case +$125
- Powder coat case +$400
Do you have questions about which package to choose?
Check out our guide on Tremec Transmissions. We cover everything from the basics to the nitty gritty details!
* Please note that the above packages do not include hard parts (non-wear items). This includes gears, sliders, and shafts. The necessity of replacing these parts is determined on a case-by-case basis. Your transmission will need to be disassembled and assessed in order to know what, if any additional parts are necessary to get the unit back to good condition. The most common problem is worn engagement points on the gears and sliders. This doesn’t necessarily cause obvious issues, unless it has gotten really bad. We recommend replacing parts to where the unit will be better-than-new once completed.
