07-12 Mustang GT500 TR6060 Input Shaft | 31-Tooth

07-12 Mustang GT500 TR6060 Input Shaft | 31-Tooth

This 07-12 Mustang GT500 TR6060 input shaft is a new replacement and fits the 2007-2012 Ford Mustang Shelby GT500. The 31-tooth, 26-spline shaft uses the tapered roller input pocket bearing design. Availability of the Tremec original input shaft is very low, so new shafts are difficult to find.

What the input shaft does

The input shaft is the main drive of the transmission. It doubles as 4th gear and splines into the clutch disc. Replace it for:

• Damaged, dull or smashed engagement teeth (grinding gears, worn synchro rings)
• An overheated input gear from low fluid or too much power
• Damaged splines or a damaged pilot bearing journal

Specifications

• 31 tooth / 26-spline
• Tapered roller input pocket bearing design
• Interchanges with Tremec part number TUFM6047

Fits the following units

• 2007-2012 Ford Mustang Shelby GT500 TR6060

Does not fit

• 2013-2014 GT500. These switched to a straight roller pocket bearing and a larger main input bearing, so this shaft will not work in them.

Bearings are not included

The old bearings cannot be removed without damage, so new ones are always required. The TR6060 has two input bearings. This shaft uses tapered roller pocket bearing, plus the main input bearing (the older tapered style). A full bearing kit already includes them. See below to purchase:

• Main input bearing/race
• Pocket bearing/race
• 2007-12 Mustang GT500 bearing kit